Optimizing Your Technique

By Nick Saviano

Lleyton Hewitt demonstrates the fundamentals of the split step, the unit turn, ball tracking, preparation, and stroke pattern

In Part 2 of this series excerpted from Maximum Tennis: 10 Keys to Unleashing Your On-Court Potential, Nick Saviano analyzes the true fundamentals of world class groundstrokes. (Click here for Part 1) For more information on ordering Nick’s new book see below.

You can have the prettiest-looking strokes in the world, but if you don’t have sound fundamentals in moving to the ball and preparing to hit it, the rest of your stroke is a crapshoot.

Good preparation will not only allow you to maximize control and power, it is also critical in enabling you to cope with the increased power in the game today.

Ground Strokes

The fundamental techniques in preparing to hit a shot are the split step; the unit turn; movement to the ball (or tracking); racquet preparation, and stroke patterns. If you improve any or all of these areas, your level of play will improve considerably.

Split Step

The split step is a vitally important technique a player uses to get her body in position to move to the ball in any direction as quickly as possible and it is one of the most basic fundamentals of movement on the tennis court.

You should take a split step every time your opponent contacts the ball. A proper split step is arguably the most important aspect of footwork. Performing the split step at the correct time will establish your balance so that you are in a position to explode to the ball once you recognize the direction of the shot.

In addition, it heightens your mental state of awareness at a critical time when the ball is coming off your opponent’s racquet. This helps maximize your ability to anticipate what shot is coming.

As Andre Agassi takes a hop step, his left foot lands but his right foot turns in the direction he is going before it touches down on the court.

The split step is performed by bending your knees, hips and ankles (all you need to think about is bending your knees, and your hips and ankles will bend naturally) and hopping into the air, which results in the actual lowering of your center of gravity as you land on the balls on your feet.

The timing of the split step is crucial. Start the split step when your opponent starts to accelerate her racquet forward to hit her shot. Contrary to popular belief, your feet do not always land together on the split step. In fact, in most cases, your feet do not land together.

What actually occurs is that you time the split step so you are in the air when the ball comes off your opponent's racquet and you are able to determine the direction the ball is being hit before you land. The result is that your foot farthest from the ball lands first, while your foot closest to the ball actually turns to point in the direction of the shot before it lands. This enables you to make an explosive first step to the ball.

Most players do this stepping out action naturally and are unaware that they make this move. I suggest that you not make this stepping-out action - leave it to instinct. Rather I would suggest focusing on the timing of your split step.

To order Nick Saviano’s book Maximum Tennis: 10 Keys to Unleashing Your On-Court Potential click here.

Unit Turn and Initial Racquet Preparation

The unit turn is generally the first move players make as they come out of the split step. The leg closest to where the ball has been hit turns and steps out in the direction of the ball while the upper body (shoulders and hips) begins to rotate. Contrary to what is often taught, you do not want to take your racquet back at this stage. However, the rotation of the shoulders along with a slight move back of the elbow of your racquet arm contribute to the initial racquet preparation.

Serena Williams just landing from her split step, starting the unit turn, and in the initial stage of preparing her racquet and tracking the ball. Note how little she has moved the racquet independently up to this point.

Movement to the Ball or Tracking

After the split step and unit turn, your movement to the ball as you prepare to hit and after your recovery step to get back into position for the next shot is what I call “tracking” the ball.

The key here is to maintain good posture--shoulders and back relatively straight with a slight bend forward at the waist--with minimal movement of your upper body and head. If you lose your dynamic balance and/or allow your shoulders and head to wobble or bob up and down excessively, it makes it almost impossible to track the oncoming ball properly.

Also, good posture gives you the freedom physically to hit whatever stroke is necessary. A common mistake is to bend over excessively at the waist, which destroys your balance and restricts your ability to produce a quality stroke. As if you were a fashion model, think of balancing a book on your head as you move to the ball.

To store energy in the large muscle groups, shoulder rotation and knee bend are critical, as Andy Roddick demonstrates on his forehand.

Muscle Loading

I know you have probably been told a thousand times to turn sideways when you hit the ball. But that is not enough because it will not produce adequate stretch--storing of energy in the large-muscle groups as you prepare to hit the ball. Focus on rotating your shoulders and bending at the knees.

In actuality, you will be stretching or loading the large muscle groups--chest, shoulders, torso, hips, legs--without even realizing it as you prepare to hit the ball. This is absolutely critical to maximizing your ground strokes and return of serves, particularly when a ball is hit at you with great speed.

When you rotate your shoulders, you want to feel the “pull” in your front shoulder. This is an important part of your racquet preparation because, once you get this “load,” you’ll automatically have taken about half your backswing with minimal movement of your racquet arm.

Loading your muscles in this manner will also enable you to generate a great deal of power with a relatively short backswing. Here is a tip to help you accomplish this. To get a feel for the loading of your upper body, have someone feed you an easy ball. Before you step across to the ball, turn your upper body and bend your knees to prepare. You will immediately feel the loading process in your major muscle groups.

Racquet Preparation

As you’re preparing your racquet consider the following: backswing, stance, and hitting zone.

Backswing. It is a myth that a player should take his racquet back first when he prepares to hit the ball. The point in time at which your hitting arm actually starts taking the racquet back varies with different styles of racquet preparation. However, the racquet usually does not move independently for significant distance until much of your rotation process is completed.

Technically, the elbow of your racquet arm on the forehand will make a slight move back as your shoulder and hip rotation begins; however, it should feel as if your shoulders and hips are the only things turning at that time.

Backswings vary tremendously from player to player. You can take the racquet relatively straight back, in a large loop, in a small loop, lead with your elbow, or use other motions. These are generally functions of style, not fundamentals; therefore, they won’t be dealt with here. The main thing is to avoid extremes and to get a good rotation of your upper body.

Williams hits a backhand with an open stance. Lindsay Davenport hits a backhand with the classic squared stance. Gustavo Kuerten hits a one-handed backhand with a closed stance. Notice the rotation and loading of the shoulders in all three players.

Stance. Three basic types of stances for all tennis strokes are open, squared, and closed. There has been a significant shift in the game toward the open stance on both the forehand and backhand. Here is a brief explanation of each.

Open stance. The open stance is now the most commonly used footwork with the forehand and is becoming increasingly more common on the backhand side, as well. To execute an open-stance ground stroke, line up your back leg close to the flight of the ball, with your front leg farther away and shoulders square to the net, as opposed to hitting the ball in a squared or closed stance with your shoulders turned perpendicular to the net and your feet lined up with the flight of the ball.

Using an open stance saves about a half step and makes for a quicker recovery. In addition, you can get more upper-body rotation with an open stance, which gives you more power. The open stance is used on the backhand more often by two-handers, but it is growing in popularity with one-handers, as well.
Squared stance. In a squared stance, your front and back legs are perpendicular to the net. Weight is transferred forward in the direction of the hit as you step into the shot. This stance is excellent for balance and hitting a controlled shot.
Closed stance. In a closed stance, your front leg steps across your back leg so that your body is at an angle toward the side fence. A closed stance should not be used to hit a forehand, particularly with an eastern, semiwestern, or western grip. It is usually only effective on the backhand side, and your first preference should always be to use the squared stance if possible.

During the course of a match you will probably use all three stances. What stance you use on a given stroke will depend on your personal technique and the specific shot you are hitting. The point is to learn to use the stance that will help to maximize your shot.

Hitting <% ns_puts [nsv_get mkm_includes mkm_oldContentFooter_inc] %>